« previous next »
Pages: [1]   Go Down

Author Topic: Carb O-Ring Size  (Read 1993 times)

Offline 4wDaz

  • SOHC Member
  • Posts: 109
    • View Profile
Carb O-Ring Size
« on: May 17, 2020, 08:12:24 PM »
Hi, Just about to start rebuilding the carbs, does anybody know what size the o rings are for the Tee where the fuel pipe goes on ? Thanks
Logged
Genuine And Aftermarket Motorcycle Parts Supplier

Offline Nurse Julie

  • 1977 CB550/4 Mongrel Brat. 1974 UK 500/4 K1. Honda CD250u.
  • Grogu
  • *
  • Posts: 8674
    • View Profile
Re: Carb O-Ring Size
« Reply #1 on: May 17, 2020, 08:18:09 PM »
6x2 rings a bell but get someone else to confirm.
Logged
LINK TO MY EBAY PAGE. As many of you know already, I give discount and do post at cost to forum members if you PM me direct.
https://www.ebay.co.uk/sch/julies9731/m.html?item=165142672569&rt=nc&_trksid=p2047675.m3561.l2562

LINK TO MY CB400/4 ENGINE STRIP / ASSESSMENT AND REBUILD...NOW COMPLETE
http://www.sohc.co.uk/index.php/topic,14049.msg112691/topicseen.html#new

Offline Oggie400F

  • SOHC Member
  • Posts: 192
    • View Profile
Re: Carb O-Ring Size
« Reply #2 on: May 17, 2020, 09:28:32 PM »
I used 2mm cross section x 5.5mm Viton on mine with no leaks.
Readily available on eBay.
The four rings for the metal fuel inlet tee piece are not included when you get a full set of Keyster kits as I found out recently.
Logged
I'm a Radiographer............I can see right through you!!

1999 VFR800 fix in Pearl Prism Black
1978 CB750F1 in Candy Presto Red
1976 CB550F Supersport Brat Bike in Black
1976 CB400F in Varnish Blue - project bike in many bits.

Offline Moorey

  • SOHC Master
  • Posts: 1677
    • View Profile
Re: Carb O-Ring Size
« Reply #3 on: May 17, 2020, 10:24:51 PM »
6x2 Viton.
Logged

Offline 4wDaz

  • SOHC Member
  • Posts: 109
    • View Profile
Re: Carb O-Ring Size
« Reply #4 on: May 18, 2020, 09:25:39 AM »
Thanks for the replies, i found some orings which came with the bike which are 1.9mm x 5.8mm in a honda bag which i thought could have been what i needed
Logged
Genuine And Aftermarket Motorcycle Parts Supplier
Pages: [1]   Go Up
« previous next »