SOHC.co.uk Forums > CB350/400
Exhaust
rosco:
looking at Andys photos there doesn't seem to be a provision for a footrest on the loop So must be earlier than the f2 Plus the angle of the loop is different to to the f2 bolt through loops The bottom tube of the loop of bolt through runs parallel to silencer where as the welded loop has to have the welded bracket to obtain a parallel run to hold the silencer IMO Ross
Nurse Julie:
--- Quote from: rosco on May 17, 2020, 06:13:10 PM ---looking at Andys photos there doesn't seem to be a provision for a footrest on the loop So must be earlier than the f2 Plus the angle of the loop is different to to the f2 bolt through loops The bottom tube of the loop of bolt through runs parallel to silencer where as the welded loop has to have the welded bracket to obtain a parallel run to hold the silencer IMO Ross
--- End quote ---
Ah yes, the footpeg was on the swing arm on some of the earlier models.
rosco:
I thought the loop was introduced to mount the footrests for a more comfortable ride for pillion riders Looks like Andys loop is only to hold the silencer?? Ross
Oggie400F:
My 400F is 1976 and has the frame hoops with bolt on bracket. According to the frame number it ties in with a late UK spec F model following the relocation of the rear footrests to the frame hoops. 🤔
Green1:
Just found a crappy picture of my 400 and it turns out my frame was like Julies and the previous owner had mounted the exhaust in a bit of an oddball way.
Mine was a UK 75 I think :-\
www.sohc.co.uk/index.php?action=dlattach;topic=19755.0;attach=45489;image
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version