SOHC.co.uk Forums > CB750

CB750K6 UK Frame Name Plate / VIN Plate

<< < (4/4)

Trigger:

--- Quote from: Phil9886 on May 23, 2020, 08:25:20 PM ---That's really helpful. The bike is a rolling chassis now so the last method will probably be the one I go for. Thanks again. Kind regards. Phil

--- End quote ---

I would do it the way James has said, by lowering the frame on the engine. This is the only way that you can guarantee  that you will not damage the paint  ;)

SeanFD:
You could also try this; I did it this way.

https://www.youtube.com/watch?v=obk7N1LDNYg

Skoti:
I found that If you first remove the cam box breather cover the motor fits in easier.
Also you're probably less likely to damage the frame paint.

BTW
Sean, thanks for the excellent Belfast to Belfast blog it's a fascinating read.

SeanFD:

--- Quote from: Skoti on June 03, 2020, 11:30:28 AM ---
BTW
Sean, thanks for the excellent Belfast to Belfast blog it's a fascinating read.

--- End quote ---

Glad you enjoyed it - and that someone actually read it  ;D

Navigation

[0] Message Index

[*] Previous page