SOHC.co.uk Forums > CB350/400

cb400 carb needle

(1/3) > >>

4wDaz:
Hi all, got a keyster carb rebuild kit from silvers, needle is a D22 but the one in the carb is a 18234, any ideas if the d22 will be ok ? Thanks

Bryanj:
Nope, use all the original Honda brass except maybe the float needle valves. Most of the aftermarket kits are known to have differences to original

4wDaz:
Thanks, by Just looking you can see the taper is different, there is no needle tube in the kit either, I will have to get In touch with silvers see what they say  >:(

Bryanj:
Might have a used 1 if you lost one

4wDaz:
Appreciate that but I’ve got 4, that’s if there all the same when I clean them. Thanks

Navigation

[0] Message Index

[#] Next page