SOHC.co.uk Forums > CB350/400

Petrol Tap

(1/3) > >>

AndyD:
As with every other part on this poor old bike the fuel tap has been abused and bodged - O rings etc. missing, all joints and threads 'sealed' with tape / goo.
Thought it might be easier to get a cheap tap on ebay instead of trying to resurrect the old one but they all show 16mm in the description while the thread on the tank is more like 19 / 20mm.
Does the 16mm refer to inside diameter or something or do i need to keep looking for a tap with correct larger thread?
Cheers,
Andy

taysidedragon:
Buy a refurb kit from Wemoto or DSS, or a new tap from them.

AndyD:
Thanks Gareth
Wemoto show one at a reasonable cost but it says 16mm which I wanted to check is corrector if there are different size fittings as the tub3 on my tank is around 19 / 20mm thread
Cheers
Andy

davefirestorm:
I’ve just bought a cheap 16mm tap from DS £21.48 delivered and fast delivery

Bryanj:
The size should be the outside diameter of the thread and i think Honda used 16, 18 and 20 on various bikes but happy to be proved wrong

Navigation

[0] Message Index

[#] Next page