SOHC.co.uk Forums > CB750

Oil leak

<< < (3/3)

mick:
Hi Andy i used Hylomar Blue when i rebuilt my engine , just make sure you get some all around the recess the pucks sit in then they should seal up ok ;), cheers Mick.

Bryanj:
Ah good old Hylomar as use by the best----Rolls Royce

JUST NOT TOO MUCH

Dave M:
Much better than silicon Hermetite.

A while back I was given a'69 G plate 175 which had a seized cam.

Once everyting was fixed I couldn't get any oil up the stud to the head. Stripped off the clutch case and found a nice blob of orange Hermetite sitting in an oilway.

A previous owner had done some work and used too much with disastrous results.

Yoshi823:
I use talc to indicate where oil leaks emanate from.Clean off the engine and apply talc (or that unused self-raising flour that is always bought but never used).

Navigation

[0] Message Index

[*] Previous page