SOHC.co.uk Forums > CB500/550
Ongoing PD46 carburettor woes (possibly)
JezzaPeach:
PS another thought. I think the idle screws may have small holes in them that may get blocked. Not sure but worth checking.
K2-K6:
"David Silver has repro ones at a more palatable £30 + VAT for the coils although they don't seem to be handed (same one for both the left and the right side as far as I can see) - has anyone had experience of these?"
No direct experience of these but they don't appear to draw any significant level of failure comments on here.
They would most likely give you a competant fix immediately though to allow you riding it while running well.
The originals worth keeping for if you decide to repair/ or for someone else to do the same if they wanted originals.
JezzaPeach:
Yes the DSS ones worked very well for me and fitted fine.
keithtraffic:
Thanks - did you replace the plug caps as well - the DSS ones don't come with those?
JezzaPeach:
Yes the plugs NGK D7EA and NGK resistor caps. 2 long and 2 short with angles at top in black. I’ll try to attach pics. Didn’t cut cables short and outer plugs can point back and in with leads through p clips. Will try a pic of that too
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version