SOHC.co.uk Forums > CB500/550

Loom routing

(1/1)

paulbaker1954:
My main loom to the headlight shell runs on the left of the frame above the tank front locating rubbers as in the picture. I have noticed that the routing causes the loom to flex when turning the bars lock to lock.

I am concerned this flexing will eventually damage the loom wiring and was just wondering if this is the correct routing?

Trigger:
Under the tank rubber, there should be a clip that goes on before the rubber that, the loom hangs in  ;)


Like so

Navigation

[0] Message Index