SOHC.co.uk Forums > CB350/400
Carbs overflow
Bryanj:
Only comes with the float in new parts lists but old 500 parts book says 16126-259-004 for just pin.
May have an old one somewhere you can have cheap.
EDIT
DS sez 2 weeks so probably from his US warehouse
Moorey:
Don't forget to carry a tapping stick for the float bowls. ;)
Nurse Julie:
--- Quote from: Oddjob on June 22, 2020, 06:48:12 PM ---
--- Quote from: Nurse Julie on June 22, 2020, 05:45:05 PM ---
--- Quote from: DaveN on June 22, 2020, 05:39:56 PM ---Does anyone know if you can buy replacement pivot pins?
One of mine has been mangled and is shorter than the others.
--- End quote ---
Buy a length of brass rod of the correct size, model makers use it a lot, and make your own, it works out very, very cheap. On ebay, just type in brass rod. Here is the item number 133013228554
(Attachment Link)
--- End quote ---
To save me measuring what the pivot pins are can you let us all know what size is required?
--- End quote ---
Indeed I will Ken, as soon as I have cooked dinner 😁😁😁
Nurse Julie:
2mm. That's the size of the brass rod to buy if you want to make your own float pins.
DaveN:
--- Quote from: Nurse Julie on June 22, 2020, 09:36:43 PM ---2mm. That's the size of the brass rod to buy if you want to make your own float pins.
--- End quote ---
Thanks a million Julie, that's an excellent tip :-)
Found this on Amazon:
https://www.amazon.co.uk/Helicopter-Brass-Ground-Shaft-Round/dp/B00JR5CG88/ref=sr_1_3?adgrpid=51679907405&dchild=1&gclid=Cj0KCQjw0Mb3BRCaARIsAPSNGpWQfjHG7CveFiqFjJaOGQGYgYTl6_g2brXHM9hhVmaWdKDb7N5z3ZAaAq0jEALw_wcB&hvadid=259060728909&hvdev=c&hvlocphy=1006584&hvnetw=g&hvqmt=e&hvrand=9528624138543477151&hvtargid=kwd-300524999702&hydadcr=14880_1829211&keywords=2mm+brass+rod&qid=1592908702&refinements=p_76%3A419158031&rnid=419157031&rps=1&sr=8-3&tag=googhydr-21
Even I should be able to get 4 decent ones out of that lot :-)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version