SOHC.co.uk Forums > CB350/400

Removing engine to frame bracket

<< < (2/2)

Bryanj:
Never removed plates in normal service operations, just used sockets and spanners

mike the bike:
You're not trying to remove the blanking plug instead are you? 

Athame57:

--- Quote from: mike the bike on June 16, 2020, 10:38:41 PM ---You're not trying to remove the blanking plug instead are you?

--- End quote ---
Just put 'cb400f cam blanking plug' into google images. I see the adjuster bolt  goes into a plug that goes into engine. hhmmm...mine has a hole for an allen key in it...looks like I've got another bodge to get rid of. some previous owner left me with a home made brake arm and non standard clutch cable with wrong fittings to sort out as well. .... I think I want the plates off so I can have a good look....

Bryanj:
OK its not an adjuster bolt its a locking bolt to stop the internal adjust bar moving.
The original bolt had a 6mm thread that screwed direct into the alloy crankcase with an 8mm thread just under the head for the locking nut. I have linked to a stainless repair kit on the forum already somewhere.

Navigation

[0] Message Index

[*] Previous page