SOHC.co.uk Forums > CB350/400

Clutch pull still very hard...

<< < (5/15) > >>

mattsz:
No luck...  :(

K2-K6:
Quite stuck then!

Try tying the clutch lever in against the bars and then tapping the cover gently to see if it'll release from the gasket.

Bryanj:
You will need a new gasket anyway

mattsz:

--- Quote from: K2-K6 on June 30, 2020, 08:46:29 PM ---Quite stuck then!

Try tying the clutch lever in against the bars and then tapping the cover gently to see if it'll release from the gasket.

--- End quote ---

I held the lever with one hand, and tapped away at different angles with the other hand... I may have to resort to splitting the gasket with a sharp edge?

mike the bike:
Make sure you've removed all the screws and not left one in.  It's the sort of muppetry that I get up to on occasion.

Navigation

[0] Message Index

[#] Next page

[*] Previous page