SOHC.co.uk Forums > CB350/400

Copper sealing washer 90441-333-000 cb350f

<< < (4/6) > >>

Bryanj:
My bad I was looking at the 400 first, but the 350 just says washer and is the same part number as the plain one, perhaps the copperised was a mod for the 400

SeanFD:
I’m picking this up to ask about washer size.

The sealing washers I took out measured M8 x 18 x 2mm.

I ordered some new ones from Advanced Fluid Solutions (AKA Silicone Hose World) - £2.12 for 2 as against £7.44 each from DS.
https://www.ebay.co.uk/itm/GERMAN-METRIC-Bonded-Dowty-Seal-Self-Centering-Sealing-Washer-Hydraulic-Fuel-AFS/271194638445?ssPageName=STRK%3AMEBIDX%3AIT&var=570153990855&_trksid=p2057872.m2749.l2649

They arrived and measure M8 x 14 x 1mm.

Can I use these? There doesn’t seem to be any other options size wise.

Bryanj:
Should be ok with that

SeanFD:
Thanks Bryan.
🤞

Bryanj:
Looks like that number has been modifyed up to 422 middle number and shows as a thick solid copper washer now

Navigation

[0] Message Index

[#] Next page

[*] Previous page