SOHC.co.uk Forums > CB750

The final steps! About to install exhausts on my CB750k6. Any tips?

(1/1)

Phil9886:
Hi. I'm at the very end of my K6 project (10yrs!) And about to install the exhausts. I bought a brand new set of factory pipes from Honda when I first bought the bike plus a fitting kit from David Silver Spares (all Honda bits but they put everything in one bag). See photos. Everyone has been so helpful as I've put this together I just so here's if there are any "top tips" or things to be careful of before / as I install.  I guess they are worth quite a bit now so don't want to mess them up. Any help much appreciated as ever. Phil

Nurse Julie:
Just fit everything loosely to start with to give you jiggle room so you can align everything prior to final tightening.

Andrew-S:
as Julie says above - I've recently refitted the exhausts on my K1 and I fitted one complete side at a time (to use as a guide) starting with in the inner pipe (2 or 3) and don't forget to fit the clip to the rubber joining piece before you tighten it all, up as I did...... ::)

Phil9886:
Thanks. Will post a photo once done. Cheers. Phil

Navigation

[0] Message Index