SOHC.co.uk Forums > CB500/550

Steering Lock

<< < (2/2)

Bryanj:
Just drill a small hole and use a large headed self taper, as long as part of the head is over the lock barrel it will be fine

fazer1k:
Found that you can still order the following part numbers (which hold the brass barrel of the steering lock in place).....

53603051000    RIVET,4.1MM                  1     1.12
53604098940    WASHER, 4.5MM                1     1.03

from www.lings.com - although the postage for the above is a ridiculous

Navigation

[0] Message Index

[*] Previous page