SOHC.co.uk Forums > CB350/400

Fuel line size?

<< < (2/3) > >>

mattsz:

--- Quote from: Bryanj on July 22, 2020, 07:35:53 AM ---The 5.5 viton hose i bought in UK is a tight fit on the carb and petcock nipples. Tell me how long you need and i will post you some at cost, i also have a box of various size clipes so would put those in as well

--- End quote ---

That's kind of you Bryan - but I assume posting such to the USA would be prohibitively expensive?  Surely if I can educate myself as to what size works for my petcock (and carb, I guess) I should be able to find what I need over here...

The stuff I just bought is 5.5mm ID - so I could figure out how to use it one way or the other.  Whether that's the right size is in question...

Bryanj:
Postage about £6gbp mate as it will be small.
I can guarantee it should be 5.5 ive fitted  about 6 lengths in the last 3 months.
I dont bother with the clips and never had a leak, the pipes get tighter

mattsz:
Thanks Bryan!  I think I'm going to stick with what I have for now.  If I need to I can find something local to use as a clamp, even if it isn't the tidy OEM spring clips...

Bryanj:
I have a big box of assorted sizes of those wire clips give me a diameter and i will see whats in there, 4 of those would be a letter!!!

mattsz:
If you really want to, Bryan... the ID is 5.5mm, the OD is 10.5mm...

Navigation

[0] Message Index

[#] Next page

[*] Previous page