SOHC.co.uk Forums > CB350/400

Wires for horn

(1/2) > >>

Athame57:
I went to fit the new horn I got from DSS today, to replace the semi-functioning non original snail thing I've got now. Oh great...the new horn has fittings for two wires, the snail has only one brown wire. Where can I get these wires, I can't find any and also how to fit them.

taysidedragon:
The wires should be a Light green from the horn button and a Black one supplying 12v power.

Bryanj:
Not if its a later type which has a wire powered by the switch and a loop to earth from the other contact. You need to check if the wire you have is connected to earth when button pushed or has +ve 12v when button pushed

Athame57:

--- Quote from: Bryanj on July 23, 2020, 07:27:36 AM ---Not if its a later type which has a wire powered by the switch and a loop to earth from the other contact. You need to check if the wire you have is connected to earth when button pushed or has +ve 12v when button pushed

--- End quote ---
Do you mean a later model (mine is a 1978 F2) or later horn?

Bryanj:
Later model, horns are all the same

Navigation

[0] Message Index

[#] Next page