SOHC.co.uk Forums > CB500/550

Cam chain tensioner seal

(1/2) > >>

oldtuggie:
1976 550
Hi
Has anyone had a problem with an oil leak from the cam chain tensioner bolt.
I have replaced the seal and the tensioner is new.
Has anyone used an o ring instead of the flat Honda seal

Bryanj:
The soft alloy washer has always worked for me as long as you are using a flanged bolt and the surface on head is good and uncracked

oldtuggie:
Thanks I will try that but I've just looked at the parts diagram and it is an o ring.
I used a seal that I got when I bought the bike as a project and was marked as the seal for the cam chain tensioner but it is a flat ring.
Not sure but it may be a seal for the tacho drive

Bryanj:
O ring is on adjuster nut not top bolt

oldtuggie:
Thanks
It is leaking from behind the adjuster nut I have fitted the wrong seal I will replace it with an o ring

Navigation

[0] Message Index

[#] Next page