SOHC.co.uk Forums > CB350/400
Brake master cylinder rebuild kit
K2-K6:
By deburring tool, I mean this
https://www.amazon.co.uk/Silverline-248844-Deburring-Tool-145/dp/B00NVPMV5I/ref=asc_df_B00NVPMV5I/?tag=googshopuk-21&linkCode=df0&hvadid=256196245361&hvpos=&hvnetw=g&hvrand=11784786374201878300&hvpone=&hvptwo=&hvqmt=&hvdev=t&hvdvcmdl=&hvlocint=&hvlocphy=9045909&hvtargid=pla-351907783351&psc=1&th=1&psc=1
Used in engineering to do this type of work.
mattsz:
I got it done today. I don't have much confidence in the job - it feels like I think it should, but it was such a hassle to get everything together, and I really feel like I abused the rubber bits trying to get everything in place, which I eventually did after a number of attempts. We'll see what happens...
The only circlip tool I have is one of these cheap kit jobs:
[ Guests cannot view attachments ]
They are the devil's own - what horrible junk! Never again...
ewanhughes:
--- Quote from: Bryanj on August 09, 2020, 10:00:21 AM ---It wont is the easy answer, i find well over 95% of the masters need to be bled the way i said, also forgot to mention make sure both the holes from reservoir to bore are clear one is tiny
--- End quote ---
Any hints or tips on unblocking the tiny hole in the reservoir?
Bryanj:
Two strands of multicore flex twisted together, usualy with piston out
Nurse Julie:
Gently push a very, very fine piece of wire down the return hole. Don't make the hole any bigger than it is, as the system won't work properly.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version