SOHC.co.uk Forums > CB350/400

Wiring Loom routing on CB400F2 & best replacement source.

(1/4) > >>

McCabe-Thiele (Ted):
I intend to fit a new wiring loom as & when I have done a total strip down for powder coating the frame.

Does anyone have a set of photos that show the original routing of the wiring loom around the various parts of the frame?
I have photographed the existing wiring location but am pretty sure it's not as it left the factory in 1978 as there are extra wires all over the place not to mention great loops of connectors with rotten cover shrouds.

I see DSS list a new loom is it a good fit?
I have found alternatives such as this link whilst researching them.
 https://www.electrexworld.co.uk/acatalog/WH-377.html

Lobo:
Hi Macab,
I’ve used the DSS replacement loom, and very happy with it. (been in place some 5 years now). All went in nice and easy...

The routing pics...

Lobo:
...and a couple more..

mattsz:
Questions about wiring loom (and hose) routing have appeared a couple of times here.  Nurse Julie has always jumped into the fray with some great photos, like these:

http://www.sohc.co.uk/index.php/topic,21429.msg191315.html#msg191315

My contribution to that thread follows.  Nurse Julie's bike is in much better condition than mine...


--- Quote from: mattsz on December 23, 2018, 07:34:03 PM ---Ok, here's 26 hi-rez pics.  As a reminder, it's a '77 USA spec.  When I was with the bike, I was thinking that you were primarily interested in wiring - looking back now, I see you were interested in brackets and hoses and tubes as well.  So these may be lacking.  Anyway, most of the hoses are out of place since my carbs and airbox are off the bike, as is my front brake system. Hope they help; you didn't specify any particular items you wanted...

The dropbox link will bring you to a folder, which you can download all at once - you'll get a .zip file of about 44Mb.  Or view and download individual pics.

They're basically front, left side, right side, and top.  I took a few angles of the left side ones, especially the electrics behind the left side cover...

https://www.dropbox.com/sh/ql1qmdlqmnto82d/AADkcQz3jsrp01k2TrsUwCp6a?dl=0

--- End quote ---

Dunno if these will help, but there you go...

mattsz:

--- Quote from: Lobo on August 11, 2020, 01:45:19 AM ---...and a couple more..

--- End quote ---

Hey Lobo - where did the last two images attached to your post come from?  They're different from all the other Honda manual standards I've seen (like the others you posted). Are there more?  They look like they could be helpful...

Navigation

[0] Message Index

[#] Next page

Go to full version