SOHC.co.uk Forums > CB500/550

H4 headlight

<< < (9/13) > >>

JezzaPeach:
PS do you think these would fit?
15A 30mm

mike the bike:
Yup, they'll do

JezzaPeach:
Perfect thanks Mike. In my rush to find a spare fuse carrier I bought an old one that’s gone rock hard but at least it has 3 fuses in it! New ones will be wrapped up nearby.

deltarider:
IIRC, length of fuses is 25mm...

JezzaPeach:
Just checked and mine is 30mm x 6mm, and 25mm will also fit. The wires just have open grips on the ends that can be pinched slightly to ensure a snug fit. That then fits into a simple lozenge shaped case.
My fuse says 12.5A “constant”, 25A “blow”. I’m assuming 15A means 15A continuous/30A blow.

I have seen comments that originals are the blade shape (“better vs vibration” - in theory I dare say), mine is the thin wire and doesn’t look original. I see both types listed on eBay as genuine Honda, and not sure about the thin ones, but the Honda “marine” blade ones look genuine.

I’m sure either filament will do. Either way, I may as well go for the apparent standard 15A blade type while I’m at it.

Navigation

[0] Message Index

[#] Next page

[*] Previous page