SOHC.co.uk Forums > CB750

Torque Settings - CB750K

(1/2) > >>

Lobo:
Hi all,

Working from a rather old CB750 shop manual, which frustrating is devoid of (any) torque values.

Does anyone out there have a nice every nut’n’bolt’ table of CB750K torque settings; specifically tonight, I’m after the swing arm pivot nut setting. Next up is changing the rear wheel bearings - so any known values there appreciated too. (eg sprocket fastenings). And next the front forks & wheel bearings.... pinch bolts, disc nuts... the whole shebang.

My elbow is indeed fine for the generic stuff, but hey, if there’s a correct value I’d appreciate it.

Ta muchly.
Simon

Spitfire:
Got these from my F2/K7 Manual, hope these are some help until an expert arrives



Cheers

Dennis

Lobo:
...perfect.
Thanks Dennis

Bryanj:
Just DONT use the torque for the 6mm in alloy

Lobo:
Thanks Bryan... appreciate the Honda alloys have a lot of butter in them!

Navigation

[0] Message Index

[#] Next page