SOHC.co.uk Forums > Project Board
OAP Ted's CB400F2 rebuild - engine not run for about 12 years.
Oddjob:
35360-341-000 superceded to 35360-329-003 Ted, colours are green/yellow and black. Costs £18.48 from DS.
The ones Bryan has listed are much cheaper, shame the pic is so blurred as the connectors don't look great but could just be the pic.
Bryanj:
Front brake switch is 35340-401-681 which has superceeded.
Only difference is wire colour and price
Oddjob:
The parts book says the 35360 number Bryan, although why Honda would produce another almost identical part is beyond me, even the wire colours look the same. Price is about the same as well, depending where you buy. In fact the proper part is cheaper at CMS. Maybe the wires are shorter on the 125 one?
McCabe-Thiele (Ted):
--- Quote from: Bryanj on March 04, 2022, 06:57:47 PM ---Cant remember the colours but they connect in the headlamp, gree/red is one that comes to mind.
You can use a front brake light switch from a drum braked cg125 or similar, wires are different colour but fittings same.
EDIT
ebay item 300184704803
--- End quote ---
You are spot on Bryan it was Geen/red on the loom - my patern switch had Dark Green/light green trace.
McCabe-Thiele (Ted):
Nice warm day so started connecting more electrical bits - horn mini loom now fitted so horn works as do all the indicators & side lights.
Fitted 4 way connector where rear brake lamp loom connection feeds the rear brake light switch to enable power supply to my electronic ignition. Fitted an additional earth cable between battery and existing loom earthing point on regulator mounting bolt to hopefully generally improve earthing.
Painted inside of rear chain guard with Zinc Primer prior to final painting before fitting.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version