SOHC.co.uk Forums > CB750

Engine full of fuel and seized up

<< < (43/50) > >>

Bryanj:
Seen worse run OK also seen better leak.
Make sure no raisedbits and try it

K2-K6:
I'd use something like Hylomar blue on both sides of the gasket for the above.

Talking about "selotape" coating level (from aerosol) to let dry before assembly and degrease faces with carb cleaner or isopropyl alcohol just prior to installing.

Trigger:

--- Quote from: PJM47 on November 01, 2020, 03:11:50 PM ---Not so keen on this. Looks like it has been hacked with a screwdriver by someone trying to open it. The top end has been off before. It was covered in sealant as well. Do we think this will seal ok with new gasket?

(Attachment Link)

(Attachment Link)

--- End quote ---

Are you sure that those barrels have not been decked ? As i can see markings from a head skimming machine. 

PJM47:
It’s possible it’s been worked before, certainly head has been off as there was a washer missing when I took it apart.
As long as we think it coukd be ok, may be with a bit of hylomar that’s a relief.

Bryanj:
Should you try the Hylomar a BIT is the important part!!!!

Navigation

[0] Message Index

[#] Next page

[*] Previous page