SOHC.co.uk Forums > CB350/400

Removing front wheel.

(1/3) > >>

Bradders:
Evening all. Seem to have a puncture in my front tyre so need to remove the front wheel. Is it easy to remove the front wheel ? Any thing I should be careful about? The Haynes makes it sound easy. TIA.

Nurse Julie:
It is just as Haynes describes Bradders and very easy. Just make sure you have the front end propped up somehow and you are good to go.

Bradders:
Thanks Julie. I’ve also been looking at the thread on here about supporting the bike with the wheel off. Thanks again.

Lobo:
Just be aware that upon replacement you tighten the leading bolts of the front axle holders first, and only then tighten up the trailing bolts.

These axle holders btw are marked F ... as are oriented.

(and apologies if Haynes has already highlighted this...)

Bradders:
Thanks Lobo that’s very useful. I think Haynes says about doing the front nuts up first but not about which way the clamps go, so thanks.

Navigation

[0] Message Index

[#] Next page