SOHC.co.uk Forums > CB350/400

Electronic ignition

(1/2) > >>

allankelly1:
Hi all

Has anyone gone over to electronic ignition for a CB400f F2 and what was the cost please

I see DS does a kit has anybody used one or did they go an alternative route ie a Daytona or Dynatec unit from eBay

Also does the Dynatec unit work with standard coils or do you need to also buy the Dynatec coils too?

Many thanks in advance

Best wishes Al


Sent from my iPhone using Tapatalk

Johnwebley:
Not fitted one to your bike.
But have a Boyer system on my 500.

Works very well.

Very happy with it

Sent from my SM-A750FN using Tapatalk

mike the bike:
Dynatec work OK with the OEM coils, although I changed mine to Dyna coils because the originals let me down in heavy rain.

Lobo:
Hi Al,

I fitted the DS offering to my CB750 (£99); it was fine, but appeared to be lightly engineered / not particularly robust. After a (still unexplained) breakdown I took it off and sold it here (!) with a years unconditional guarantee which has never been claimed... so I guess it was ok.

Now I’m using the Boyer units (£140 each on the 750K2 & 400F2) and all appears well. These ignition systems appear to be well made, use the original coils, dispense with the mechanical advance / retard, and in the 400F, fits nicely attached to the battery strap / behind the side panel.

The Dynatec S appears to retail at roughly the same cost. They say the standard coils are ok, but recommend 5 ohm coils replace them. (more cost?). I understand it uses the original advance / retard.

Considerations:
(1) some systems (eg Hondaman I think) maintain use of the contact breakers and thereby give you roadside redundancy in that the electronic unit can quickly be disconnected and the ignition easily reverted to how Honda intended. There are a lot of fans out there due this feature...

(2) Some systems suggest different coils... personally this puts me off as the bracketry/ connectors all perhaps need modification - which down the track just makes life that much harder when adjacent or replacement parts are needed.

(3) some systems retain the mechanical advance / retard, others don’t. Personal preferences again, but if going full electronic my gut feeling is to go the whole hog.. and do away with potentially weak springs / binding cams etc.

(4) you probably want your electrics to be in good condition as these electronic ignitions will be more voltage dependant than simple breakers + capacitors.

I can’t tell you I particularly notice improved mpg or performance. What I do notice however is much improved starting - particularly on the ‘750.

Cheers.
Simon

McCabe-Thiele (Ted):
I fitted Dynatec with their coils - nice kit they supplied me with the bigger rotor f.o.c. It comes with leads as well. Enough to make a second set of leads with angled connectors. Fitting instructions were easy to follow. I've done the static timing method to get it going. I will use my timing light to tweak it later.

Navigation

[0] Message Index

[#] Next page