SOHC.co.uk Forums > CB500/550

brake pads

<< < (2/2)

paulbaker1954:

--- Quote from: Oddjob on October 21, 2020, 08:35:28 PM ---Anyone tried SBS ceramic pads, got them on my CB1300 and they are fantastic, great bite, don’t wear the discs like sintered and very little dust. Work well from cold as well unlike sintered and resist fading unlike organic. Fairly sure I checked that SBS make them for the 500/550 but could be wrong.

When mines ready for the road I’ll certainly be fitting them if available. Just checked and they are SBS 501HF

--- End quote ---

Good to know Ken, just changed mine for ENC in an attempt to stop bloody brake squeal which didn’t help.

One of these days I will lose the squeal.

hairygit:
I really don't get what issue people have with brake squeal on the old SOHC"s, many of them did it when new, I tend to investigate if the squealing gets less or stops, a sign to me that all is not well. Often traced to a swing arm pivot or pad stiffening up and needing stripping, cleaning and greasing where needed. Plus, the squeal is letting others know your brakes are working, one more chance of being noticed by blind drivers!

Sent from my POT-LX1 using Tapatalk

deltarider:
Before you take that swingarm apart - so far I haven't seen one that needed it - you can easily check it for free movement. With front wheel removed, tap the assembly sideways lightly with just one finger. When it swings smoothly, nothing is wrong there. A few tips. Nylon washer behind the LH side pad needs to be there. Smear lightly a little bit of copper grease or Ate lube on the sides and the back of the pad. EBC pads might need to have paint removed from the side. On all my bicycles I can make my front brake sqeal like hell by mounting the pads thus that the front of the pads contact first. When I fit them thus that the rear of the pads contact first, all sqealing is gone. To Oddjob's post: I wonder if ceramic pads will offer much improvement given our oldstyle stainless steel disks. Wouldn't you need ceramic disks as well? What disks does a CB1300 have?

Gromitdog:
Hi John

I have a CB550 K3 and I stripped down the front brake & changed the pads and replace them with Genuine Honda ones As other say here on the forum if they a squealing they are working but i found they need to have heat in them if I came down Sutton Bank (In beautiful Yorkshire ) the time I get to the bottom they are nice and warm and seem to work better too  :), Also these are 40 year bikes and brake systems and you possibly have to allow for that too I found I just have to brake earlier and expect the blind idiot to pull out in front of you  ;D

Navigation

[0] Message Index

[*] Previous page