SOHC.co.uk Forums > CB750
Swinging Arm Bush appears to be a non standard size, why?
Nurse Julie:
Yep, definitely something weird going on. I'm working on the assumption that both Sliver and CMS get their stock from the same supplier and are incorrect 🤔🤔🤔
leadnavel:
--- Quote from: Bryanj on October 19, 2020, 12:21:35 PM ---Being as its plastic it may close up enough but you would have to fit it to check, have you measured the od of the bush and id of the arm?
--- End quote ---
I'm not able to check I/D of the arm Bryanj as me, being of the cautious persuasion, didn't want to remove the old bushes before I had a chance to check the new ones for size. Just as well as it turns out, at least now I can rebuild using the old bushes/coller. It was a 50/50 call whether to replace the bushes.
steff750:
;) hi why not bite the bullet and buy brass bushes (off julie) at least you know they fit and to be honest the plastic bushes are crap i never ever felt safe with them ive changed loads over the years and never put plastic bushes back in
leadnavel:
--- Quote from: leadnavel on October 13, 2020, 11:50:31 AM ---Thanks for your help guys. I have asked CMS for a refund on the parts but I have had no response, it seems to have fallen on deaf ears!
--- End quote ---
My apologies are due to CMS as they have refunded me for the bushes, although they still insisted that they were the correct part.
Erny:
I had the same issue year ago (Julie remembers well) - too big ID - mine were 21.7, they had free play on new collar. After I ordered new from producer all was OK
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version