SOHC.co.uk Forums > CB750

Top yoke washers.

(1/3) > >>

Johnny4428:
Hi, sorry this is probably old ground but can anybody confirm the thickness of the d washers in the top yoke clamp?
Also is their just one size for all models that require these?

AshimotoK0:
Here's my drawing ..  'Checked by'  S.B. Devotion ;D ;D


Top Yoke Spacer P/N 53235-300-000  Dimensions taken from my 3/71 CB500K0 but same P/N as CB750

[ Guests cannot view attachments ]

Johnny4428:
Thanks Ash, most helpful. Will probably have to fabricate something as no longer available.

Trigger:
If your top yoke bolt holes are 7mm with 7mm bolts then, you don't require them  ;)

And they are ready available.

philward:
So without me getting the top yoke out of storage for my 500k2, does my model need them Graham? (I know you will know from the top of your head!).

Navigation

[0] Message Index

[#] Next page