SOHC.co.uk Forums > CB750

On going electrical issue.

<< < (4/8) > >>

Johnny4428:
Thanks Bryan, yes that readings are the “net” value. I think the meter is shite to be honest, just put a new battery in it that’s probably doubled the value, and that was a cheap battery from tesco.😂 I will carry out more tests tomorrow with another meter.

Bryanj:
Is this the one with a 3 fuse box or the single fuse?

Johnny4428:
Three fuse..

Bryanj:
OK, those fuse holders loose their "springiness" enough to cause a high(er) resistance contact to fuse which causes heating and in the states has even loosen the solder connection to the wire making the problem worse.
On the US site Mark Paris(hondaman) makes a plug and play blade fuse conversion to replace them.

With meter =ve probe on battery check +ve voltage at both ends of main fuse both with ign off and on, if there is a measurable difference the fuse holder is duff

Johnny4428:
Thanks Bryan I was having a bit of trouble getting the fuse to connect at times I put it down to just old dirty connections same as rest of bike. I will try that today. Central heating pump to change first. Success of that depends on isolation valves.

Navigation

[0] Message Index

[#] Next page

[*] Previous page