SOHC.co.uk Forums > CB350/400

Hondabond for oil pump/crankcase joint?

(1/1)

SeanFD:
When reinstalling the oil pump, is it necessary or advisable to use Hondabons or other sealant on the mating surfaces?

I haven’t seen anything to the contrary so I’m assuming that the torque on the bolts is the standard ones for M6 and M8 bolts.

Trigger:
If it has a new o'ring that will seal  ;)

SeanFD:
Thanks Trigger.

It does indeed have a new o-ring, so I’ll just tighten it up.

Navigation

[0] Message Index