SOHC.co.uk Forums > CB750

HELP ... NOT ENOUGH HOLES IN MY CARB BACK PLATE 😢😢😢

<< < (2/3) > >>

honda-san:
Previous reply should of read...
I think you meant later K2's when you suggested some had a LEFT side petrol tap. Those later bikes had the extra hole at the left side of the mounting plate (and so three holes in fact).

Chris R.

Nurse Julie:

--- Quote from: honda-san on November 20, 2020, 07:09:06 PM ---Previous reply should of read...
I think you meant later K2's when you suggested some had a LEFT side petrol tap. Those later bikes had the extra hole at the left side of the mounting plate (and so three holes in fact).

Chris R.

--- End quote ---
Hi Chris. Thanks for your reply. Yes, I typed it incorrectly, I meant to just say later tanks had the fuel tap on the left side.
Thanks for the details, I can now see where I have gone wrong with the pipes, I will start again 🙄🙄🙄

Nurse Julie:

--- Quote from: sprinta on November 20, 2020, 07:07:03 PM ---I think you will find that you use both the top and bottoms holes on the RHS, that is how my pipes are routed on my 73 UK K2.

--- End quote ---
Thanks Andy, with your picture and Chris R's description, I can now see I have done it totally wrong 😕😕😕

Nurse Julie:

--- Quote from: Crispy on November 20, 2020, 07:04:36 PM ---Couple of photos showing the left hand pipe routed around the back , and a front view of the pipes coming through the back plate.

--- End quote ---
Thanks Mick 👍👍👍

SeanFD:
Not sure where I got these pics from, but they worked on my '74 UK K2. Same as yours Julie, 2 outlets on right side.

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

Navigation

[0] Message Index

[#] Next page

[*] Previous page