SOHC.co.uk Forums > Project Board
CB750 K5/6/7
Laverda Dave:
If the engine is already out of the frame and the head is off I would open it up to check everything is ok and also to renew the chains. If the pistons are rusty chances are something else will be as well and you don't want to be pulling that lump out twice :(
Rozabikes Tim:
--- Quote from: Laverda Dave on November 25, 2020, 09:56:29 AM ---If the engine is already out of the frame and the head is off I would open it up to check everything is ok and also to renew the chains. If the pistons are rusty chances are something else will be as well and you don't want to be pulling that lump out twice :(
--- End quote ---
Double ditto ;)
Brett72:
Cheers gents. I think that is the way i am going to go, just dubious on how much money i will put into this project. Will just have to drip feed without the missus noticing lol. Any advice on the best place to get parts around the UK?
Trigger:
All depends on your budget.
First i would make sure that the head is K6 and not K7/K8 as, you bought the bike in bits.
Any short cuts on these old 750 engines can bite back big time ;)
Brett72:
Trigger, are there any easy ways of telling the difference between k6 and k7 heads?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version