SOHC.co.uk Forums > Recommended Sources for Parts and Services
Circlip Pliers
taysidedragon:
I bought a cheap set at a bike show a few years ago. They've been fine for occasional use but wouldn't last long if used every day.
McCabe-Thiele (Ted):
I bought a Kamaza pair with various ends at a Sunday Market at Donnington about 30 years ago they have done everything I have asked of them. They were just under £10 back then pre e-bay prices.
Deano400:
Thanks All for your advice.
I would have liked the Bahco but for what I do I couldn't justify the spend. So I've gone with the Halfords Advanced.
Thanks again.
K2-K6:
To be fair, those Halfords advanced tools are very good quality and I'd forgotten about them until mentioned.
Kamasa, as also mentioned, I've a set of open and ring spanners that have been continuously used over the years and still going strong.
One of my most useful buys has been the 1/4 drive Bahco socket set though, goes up to 14mm and with it's "wonk" drive extension, gets into so many awkward places.
It's always nice to use things that just work well.
Deano400:
I have a small (think it's the smallest you can get) 1/4 drive Bahco socket set and the quality is very good.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version