SOHC.co.uk Forums > CB500/550

500k2 Carb Actuating Bar Removal

<< < (2/2)

philward:
Thanks again Julie

Trigger:
Do not try to force the bar until you remove the pin, this will damage the bronze bush.
I drill the pin out and then tap a thread and make a small screw with a nipple on the end to sit in the groove of the bar, as per pictures.


[ Guests cannot view attachments ]




[ Guests cannot view attachments ]

philward:
Pin out - and that was my exact plan Graham - thanks for the pictures

Navigation

[0] Message Index

[*] Previous page