SOHC.co.uk Forums > CB500/550

swing arm cb500 or 550k3

(1/2) > >>

mickwinf:
I got this swing arm with a job lot, it has the open wheel end with the stoppers to make it easy to remove the wheel on the 4 exhaust models. The question is, is it a 500 four or a 550 k3 or are they the same? is there an easy way to tell?

Bryanj:
No grease nipples in bolt so should be one in middle making it a 550 whatever, also the collar should have just one groove all the way round on each end rather than a spiral on each end, maybe top hat bushes as well.

With all that will fit either as the bushes and collar will be shot anyway

mickwinf:
Thanks for info Guys, was thinking k3 as lots of the other bits were also k3

Bryanj:
Missed those Ken, just looked at the obvious(to me anyway) bits.
Keep it safe

mickwinf:
I have just found that the rear chainguard mount has broken off.

Navigation

[0] Message Index

[#] Next page