Other Stuff > Misc / Open

Exhaust gas analyser

<< < (3/4) > >>

JezzaPeach:
Many thanks I will look for a local service. Yes I think all original. I’ll give it some more decent runs to see if it improves. My 2020 few ignition issues probably didn’t help. Kind regards

gtmdriver:
I used to use a Gunson Gastester when I had an oilhead BMW and it was a bit fiddly to use but worked well. After a few tries though I found that tuning the idle mixture by ear got me to exactly the same settings as the gastester.

K2-K6:
Same here

[ Guests cannot view attachments ]

Had my one for many years and used a lot but still works fine.  As it has a calibration routine it still seems perfectly repeatable and worthwhile for the OP as second hand they don't cost too much and really easy to use.

Skoti:
It would be good to know what the correct C0 meter idle speed readings should be.

Anyway could you not measure the readings on the cylinders that have the correct spark plug colours and then set the other carbs to match?

Provided your exhaust silencers are not interconnected  I'm sure that would be possible with a meter similar to what K2-K6 has just mentioned.

good luck

Skoti

JezzaPeach:
Many thanks, some very helpful advice.

Navigation

[0] Message Index

[#] Next page

[*] Previous page