SOHC.co.uk Forums > CB750

Righthand switch wiring

<< < (3/4) > >>

AshimotoK0:

--- Quote from: Dave B on January 31, 2021, 04:52:23 PM ---SO,
Black and blue wire from run switch is the live feed
Black with white wire goes to coils.
All now working.
Tomorrow i start on the new lefthand switch!
Thanks for your help
Cheers,
Dave

--- End quote ---


I think plain black is +12v feed to kill-switch and  the other side of that switch  is black/white going to both coils .. not sure where black and blue comes into it. This link is a useful guide to Honda bike colour codes. http://www.satanicmechanic.org/wiringcodes.shtml

Moorey:

  Do you know that is the wrong switch for a USA f there are no light controls on a USA  Rhs switch. Just the kill and start button. The USA harness is different to the UK one.

Moorey:
USA switch from SIlvers.

                  TypeGenuine PartPart No_
35130377P00
35130-377-P00
Price£75.00
(£90.00 inc vat

Dave B:
Brilliant
Thank you

Bryanj:
Might be genuine part number but the P00 means its pattern part, i thought looms were the same and just switched varied.
I dont remember black/blue being in ant Honda switch and i know some months ago it took several weeks and lots of e-mails to sort out a US site member who had pattern switches with ompletely wrong colours.

As long as you have verified that the black/blue goes ONLY to one side of the kill switch treat it as a straight black

Navigation

[0] Message Index

[#] Next page

[*] Previous page