SOHC.co.uk Forums > Project Board
Finally retired and building my project bike
gamma:
I’m sorry, I’ve neglected to keep posting on this site, I’ve posted mostly on the US site, but I’ve realised that really I should be posting on here. I am retired to Spain.
I’ve been working on the wiring, and seat unit and fairing and front fork brace with mounting for the mudguard and fitted shocks from YSS.
I’ve had to make spacers for the shocks to align them correctly at the top mountings as I’m using a K7 swinging arm on an F1 frame.
I added a wood base for the seat unit and had to teach myself to use a MIG welder to make a mounting for the fairing. Drilled and tapped a hole each side near the headstock for the mounting which has a pin which locates in a groove that I filed on the front seam where the ptfe tape is sitting
gamma:
More pics of the current progress.
Fitted an x-ring 530 and had fun with the rivets.
Finally got power on without any smoke
philward:
Great work, looking really good too - please keep posting
Laverdaroo:
Thats ace, well done and keep posting ;)
gamma:
Thanks guys 😃
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version