Other Stuff > Misc / Open

Engine Paint Curing

<< < (2/2)

philward:

--- Quote from: Athame57 on February 03, 2021, 11:32:14 AM ---I don't have much in the way of facilities at all so I just plain cleaned the engine, sprayed it in the frame after lots of masking off and run the engine.......didn't come out too bad at all!

--- End quote ---

Only trouble is it will be another 2 months before engine is assembled/fitted and paint has to be curred after approx 12 hours

boilermaker1:
Hi, I used the same method, when I painted my 400F engine. worked very well

philward:
Thanks for all the input - sounds like its worth a go - think I just need to put a breather hole near the base of the box to allow air out to avoid heat gun overheating

Navigation

[0] Message Index

[*] Previous page