SOHC.co.uk Forums > CB350/400

400/4 Regulator rectifier wiring m

<< < (2/3) > >>

McCabe-Thiele (Ted):
Ask DSS they are very helpful.

TrickyMicky:
I obtained my one from DSS a couple of years ago, and the wiring info was included in the box, and a lot simpler than I thought it was going to be. The cable with the multi-plug attached I managed to route it over to the left side of the bike which meant I could mount the new unit where the old regulator box was fitted, there being a touch more space there. The only part I had to manufacture (Bodge!) was to make a mounting bracket. Cut and bent an old brass window hinge, rust free and good earthing.   I would be tempted to message DSS and ask if they could email you a copy of the instructions.

THUNDERDOWNUNDER:
Thanks for the info . Instructions came with unit but some one has translated it from Japanese to pigeon English .  The unit on DSS website shows unit with a red/Black wire with two male spade coming off it . The one I received  had a black wire with two spades coming off it . Don’t think it matters what colour the wire is I just need to know where to plug those spades into . The old trgulator still on bike with Green Black White wires coming from harness . Sent DSS email please explain so hopefully I shouldn’ know soon . Thanks again guys and gals

THUNDERDOWNUNDER:
DSS Instrucions . Anyone translate please

THUNDERDOWNUNDER:
Second page

Navigation

[0] Message Index

[#] Next page

[*] Previous page