SOHC.co.uk Forums > CB500/550

Reg/rec wiring

(1/3) > >>

Lkp:
Evening all,

New to the forum and I'm after a little advice. I'm wiring a cb550 for someone need some advice on the charging system I'm fitting a new style reg/rec.

3 yellow wires are pretty self explanatory
But the red, green and black I need some help with? The instructions are for the original loom but this bike came to me with no wiring at all.

Is the field coil "excited" by the reg/rec?

Ive attached a picture of the reg/rec that was purchased from David silver

Thanks

Lkp:
I put that block connector on.. I pulled the red and green out as I'm. Not sure where they should go?
Yes the black had 2 spades.. Like I said it's not going on a stock loom

philward:
Have a look in Alladins Cave (see menu at top of screen) for CB550 shop manual - should have a wiring diagram in the manual

Lkp:
The manual only shows the old style separate regulator and rectifier..
I need to figure if this new style excites the field coil or its a power from another source

Thanks

Lkp:
Thanks for the help.. But like I previously said it's a totally custom loom not like the original one so connectors have changed etc..
Pretty much just need to figure out how the feild coil gets its power?

Navigation

[0] Message Index

[#] Next page