SOHC.co.uk Forums > CB500/550

Brake hose thread size please

(1/1)

paulbaker1954:
Anyone know what the female thread size is where the caliper steel pipe joins bottom hose.

Looking to make up some braided hose and need tight end fitting

(Part 4 in picture)

Erny:
Paul

attached mine, original - M10x1.25
[ Guests cannot view attachments ]

Bryanj:
Played this game a lot, several of the braided end fittings even with correct thread will not seal to the metal pipe as you need the nut on the metal pipe needs the first two thread removed to allow it to screw in far enough the seal the flare

Navigation

[0] Message Index