SOHC.co.uk Forums > CB350/400
Bike lift recommendations
billdn:
--- Quote from: Charlie J on March 05, 2021, 08:18:50 PM ---I bought an Eazy Rizer Red about ten years ago after a search for a safe, versatile and space friendly bike lift as I didn’t have room in my shed for a platform lift. I’ve used it on all my bikes from pit bike through lightweight klx250, yz125, Ducati Scrambler, Triumph Thruxton 1200R and heavyweight XJR1300. It takes a bit of adjustment for individual bikes but you soon get the hang of it. No need to remove exhausts, both wheels off the ground and doesn’t take much storage space when not in use. Attached is a photo of my CB500 K1 on the lift together with a link to a more professional presentation than my dodgy photos in a grotty old shed.
https://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&ved=2ahUKEwiXgMTG-5nvAhWNh1wKHY-pCYY4ChC3AjAAegQIBBAD&url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DOjG3HzoeBtU&usg=AOvVaw2soyblmpZ-PUjcq8pbIleQ
(Attachment Link)
(Attachment Link)
--- End quote ---
Thanks for the pics, did you have to remove the exhaust or was it off for other reasons?
billdn:
--- Quote from: Seamus on March 06, 2021, 08:17:44 AM ---Used the Eazy Rizer for quite a few bikes over the years. Very good tool.
I have 3 types of fittings for it.
Could be for sale as it has not been used for a long time
--- End quote ---
Thanks Seamus , what fittings have you got , I see the website has several available - what worked best with the 400/4?
Nice offer but see you're in Luton and i'm in Brighton area so no chance of picking it up if you wanted to sell it :( at the moment. Postage could be costly too.
Could you PM me with what you would be thinking off for the lift by the way , if you're open to offers ;)
Charlie J:
Thanks for the pics, did you have to remove the exhaust or was it off for other reasons?
[/quote]
No need to remove exhaust. The bike is having a total rebuil and I haven't refitted the exhaust yet.
Seamus:
I will pm you some pictures of the bits I have. The 2 hoopps for the wheels, the gearbox and exhaust lifts and the chassis bars.
Will try to get some today
billdn:
--- Quote from: billdn on March 07, 2021, 06:54:46 PM ---
--- Quote from: Charlie J on March 05, 2021, 08:18:50 PM ---I bought an Eazy Rizer Red about ten years ago after a search for a safe, versatile and space friendly bike lift as I didn’t have room in my shed for a platform lift. I’ve used it on all my bikes from pit bike through lightweight klx250, yz125, Ducati Scrambler, Triumph Thruxton 1200R and heavyweight XJR1300. It takes a bit of adjustment for individual bikes but you soon get the hang of it. No need to remove exhausts, both wheels off the ground and doesn’t take much storage space when not in use. Attached is a photo of my CB500 K1 on the lift together with a link to a more professional presentation than my dodgy photos in a grotty old shed.
https://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&ved=2ahUKEwiXgMTG-5nvAhWNh1wKHY-pCYY4ChC3AjAAegQIBBAD&url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DOjG3HzoeBtU&usg=AOvVaw2soyblmpZ-PUjcq8pbIleQ
Easy rizer ordered and delivered within 24 hours impressive! And looks really good quality, Dave of Easy Rizer advised getting the heavy duty foot peg fitting set for the 400/4 .
all assembled and ready to go but where the devil does the front platen fit , the foot peg bracket is obvious but the only place for the front lifting platen looks like on the exhaust itself - possibly the sump/belly pan with a lump of wood under.
Question is what do you use/do, 'cos I'm baffled! :-\
(Attachment Link)
(Attachment Link)
--- End quote ---
Thanks for the pics, did you have to remove the exhaust or was it off for other reasons?
--- End quote ---
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version