Other Stuff > Misc / Open

Gas fire gasket

(1/3) > >>

mike the bike:
Is there any gas guys out there who can assist me?  It's a Baxi Bermuda back boiler, GC  44 075 08.  I replaced the pilot light/ ASD assembly because it wasn't igniting.   That's all sorted but the asbestossy O ring between the part I fitted and the gas solenoid valve had disintegrated.  I replaced it with something else but it's overheating.  I've tried everywhere to get a parts list but no luck so far.
Where can I get one of those asbestos type O rings?  It's about 6mm i/d, 12 o/d, 4mm ish thick.  If I had the correct material I could punch one out.
I'm hoping there's people here with materials knowledge.

taysidedragon:
Waiting for the news report of gas explosion in Caerphilly 🙁🤞

mike the bike:
I used to repair gas cookers and gas tumble dryers.  Not many of them exploded afterwards. 💥

K2-K6:
Have you tried syncing the carbs?  ;D

Same as you found,  can't see any parts list in searches at all.

sye:
http://www.heatingsparescentre.co.uk/baxi-c4/combi-c53/combi-80-maxflue-gc-no-4707507-c57/baxi-dhw-plate-heat-exchanger-o-ring-seal-248049-p22645/s22804?utm_source=google&utm_medium=cpc&utm_term=baxi-dhw-plate-heat-exchanger-o-ring-seal-248049&utm_campaign=product%2Blisting%2Bads&cid=GBP&gclid=EAIaIQobChMI9ci63ZKc7wIV2OvtCh0DgQ3EEAQYAiABEgIx-vD_BwE

Navigation

[0] Message Index

[#] Next page