SOHC.co.uk Forums > CB500/550
Cb 550 ss spain
Bryanj:
The 3 O rings to crankcase should come in a complete gasket kit and the cover O ring Honda never sold as a spare but if you get a 46x2 O ring which is a Goldwing part it works
murdock:
Unfortunately my seals kit does not have them, the pump I do not plan to open it, that will be the 46, only would be the ducts and the one that seals the body to the housing, then try to measure it, but measures more than 50 mm x 3mm small I think 14
Bryanj:
They do not come in the SEAL kit they come in the GASKET kit
murdock:
My kit is not complete, I have taken measurements, 14x 3 mm and 53 x 3 mm I think it would work well, the 46 mm will be the inside, but I will not open the pump.
I will buy them loose for a few cents.
murdock:
I have opened the engine, everything seems fine, but I have found some wear or rubbing on the central selector fork, I don't know what gear it engages, the gearing looks fine, tomorrow I will check it in a better light.
Those are the numbers I was supposed to find right?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version