SOHC.co.uk Forums > CB500/550

Cb 550 ss spain

<< < (34/44) > >>

murdock:


I can't imagine where this one is from either ?

philward:
Can't calculate seal size but could it be the seal for the long clutch push rod? 26 in diagram?
https://images.cmsnl.com/img/partslists/honda-cb500k2-general-export-e-15-transmission_big3IMG01171119_410b.gif

murdock:
Thank you very much , you are very kind , maybe I should have told you in the beginning what is a 1977 France F2 and maybe that was not my kit , but I think it will work anyway . I don't know if it will be the same as the oil seal which no longer has the metal washer.
But I think the one in the kit will hold.
In the photo you can see a mark on the trunnion that was made by the washer.

murdock:
Where I bought it I said for 500 and 550 ´this is the product in cmsnl, I think it only varies in the one of the clutch regulator and in the push rod cap, I think I will not have problems
I will replace the same cap
today I'm going to put the parts together

  https://www.cmsnl.com/products/oil-seal-kit-oe_90000323000p/

ask the experts, inside the seals do I usually put a little grease for pneumatic seals,
 on the outside? Should I put in some Hondabond?

murdock:
ok, no problem, thank you very much

Navigation

[0] Message Index

[#] Next page

[*] Previous page