SOHC.co.uk Forums > CB500/550
Cb 550 ss spain
Bryanj:
58.5 is standard size for a 550 so you need standard rings and i wouldnt hone just take the glaze off with emery cloth or a "flap wheel"
K2-K6:
--- Quote from: Bryanj on April 06, 2021, 07:23:58 AM ---58.5 is standard size for a 550 so you need standard rings and i wouldnt hone just take the glaze off with emery cloth or a "flap wheel"
--- End quote ---
Yes, about "glaze busting" but I was unsure how that would translate into Spanish language :) "rompiendo el esmalte"
Bryanj:
Me neither and really unsure about flap wheel but as i only speak lancastrian the rest of the country never mind the world is at a dissadvantage
murdock:
in Spanish it would be grinding well or griding tooth
murdock:
Hello, today I removed the other pistons, I measured them and they are all the same as the first, the rings are healthy but worn, they have a lot of gap, they were bought 6 years ago in cruizing image or whatever it is called, I think they are not very good, just about 2000 km, I suppose that due to the velocity stacs there should be other signs of wear, there is only a small friction in the piston 3 and 4, I will buy a kit of standard size imd rings, (or do you recommend others?) I hope they are of good quality, I have taken a photo of the tool in question, whatever its name is ,ha ha
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version