SOHC.co.uk Forums > CB500/550
Cb 550 ss spain
Bryanj:
No oil just a pass through and very good wash off afterwards
murdock:
I have it
Bryanj:
Maybe i'm too cautious but a proper hone can take several thou out and as the piston/bore clearance is very tight plus reusing old pistons its just me thinking it might take too much whereas the flapwheel will simply remove glaze, i used to rebuild essex, kent and pinto engines very regularly for a lead footed mate and only ever used the "glaze busters" about at the time which were basicaly long shanked flap wheels
murdock:
the few times that I have changed rings I have used a 3-legged grinding wheel like the one in the photo and I have gently scratched the surface with oil, I will see how it looks with the dry-mounted sandpaper, I have taken the precaution of buying a finer grit (150 ) I'll show you how it looks, I haven't bought the rings yet, I don't know whether to buy the 4 INTO 1 or the IMD ones, they are made of different materials
https://www.ebay.de/itm/Reproduction-Piston-Ring-Set-of-4-Standard-13011-374-000-Honda-CB550/172685809641?hash=item2834e057e9:g:ebcAAOSwPh5ZIHKB
https://www.ebay.de/itm/163318063827?mkevt=1&mkcid=1&mkrid=707-53477-19255-0&campid=5338722076&toolid=10001
murdock:
anyone has experience with any of these rings?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version