SOHC.co.uk Forums > CB350/400

Typical chain adjuster seized & worn in wrong place?

<< < (3/3)

taysidedragon:
Mine was the same but freed up fine with a dremel and needle files. Pivoted beautifully afterwards.

ttr400:
Oddjob, been trying to get over since last year, but with Covid it's just too costly with all the restrictions etc.
I'm itching to get to my SA registered CB400F in the UK. had a trip planned for Iceland last year but was moved to this year...can't see that happening.
I often bring parts over with me, so far not had any issues with customs.

While i'm on here.....I need a CB400F 76/77 frame with V5 or a complete basket case bike. anyone who can assist in getting one would be appreciated.

Kevin

McCabe-Thiele (Ted):
I have cleaned up the existing cam chain adjuster, 4 hours soaking in Oven Gel, rinsed  followed by 36 hours in Evaporust with a little Wet & Dry in the pivot gaps - pin rotates freely as well.
Moves about as it should removed the sharp edges caused by the chain - good to use again!

horseshoe adjuster by Macabe Thiele, on Flickr

Navigation

[0] Message Index

[*] Previous page