SOHC.co.uk Forums > CB750

Is it knackered?

<< < (2/2)

Johnny4428:

--- Quote from: K2-K6 on April 07, 2021, 09:39:58 PM ---Looking at the rotors again,  they're more pock marked from a bit of "clattering" as opposed to wear in terms of not much being worn away,  if that makes sense.  With the cavity volume being probably left not much different, or none at all, then that would support reasoning of very little pumping loss.

Whatever has been through there hasn't been there long, and probably just ended up left in the oil filter.

--- End quote ---
Good point, thanks for the logic!

Johnny4428:
Clearances coming in at >0.05 & <0.10  I would guess around 0.07mm. Well within 0.35mm specified in W/shop manual. So will clean up and re-use.

Navigation

[0] Message Index

[*] Previous page